HTC Thunderbolt
Rooting Instructions
- Modifying / replacing your phone's software may void the phone's warranty and may render phone to 'brick' status - meaning your phone will not be worth much more than a brick.
- Rooting a phone is entirely at your own risk. No one affiliated with ROMWarez is responsible for your decision to root your phone.
- Unlocking the bootloader on most phones will automatically wipe all data.
- Always backup your current Apps/Data/SMS Messages before performing any type of rooting procedure. Find these backup apps on Google Play. If you have a Google account, then backing up your contacts is unnecessary as these are on Google servers.
- Many hours have been spent compiling and creating this unique Android application. If you feel that SuperRoot-DIY has helped you, please consider a donation.
Unlocking the Bootloader
- Download and install the phone's USB drivers (HTC Sync) for computer.
- Download and extract RootFiles.zip into a folder on computer desktop.
- Download and extract Revolutionary rooting application to desktop.
- Download SuperUser zip file to computer desktop. Note: Do not extract.
- Enable USB debugging: Menu --> Settings --> Applications --> Development
- Ensure phone is in 'Charge Only' mode.
- Connect the phone to the computer through USB.
- From the RootFiles folder/directory created earlier on computer desktop, double click on the 'Open-Command-Prompt' file and type adb devices to ensure phone and computer drivers are installed correctly.
- From command prompt type: adb push Superuser.zip /sdcard/ .
- Go to Revolutionary.io and download/extract to desktop.
- If firmware version is 2.11.605.9, skip to steps below starting with rooting instructions for this Build.
- Open Revolutionary folder downloaded in earlier step.
- Right click it and select Open as Administrator (if that option is not listed, simply select Open).
- Input beta key received from website. Note: Newer versions of Revolutionary may not ask for the beta key.
- Once S-Off is gained, message to flash clockworkmod recovery will be displayed. Type in 'Y' and press Enter.
- Once recovery image has completed flashing, command prompt window will close.
- On your phone, S-Off should be displayed at the top of screen.
- Remove USB cable from phone.
- Remove the battery and put it back in.
- Power on the phone by holding down Volume Down + Power until phone boots.
- Use Volume Down to navigate and then Power Button to select Recovery.
- Phone should reboot to Clockworkmod Recovery.
- Attach USB cable from phone to computer USB port.
- Select 'Mounts and Storage' using Volume Buttons to move & Power to select.
- Select 'mount sdcard'. SD Card directory should pop up.
- Select 'unmount sdcard'.
- Select 'go back'.
- Select Install zip from sdcard and choose the superuser.zip file.
- After superuser.zip is flashed, reboot phone.
- Once phone reboots, open app drawer.
- Superuser app should be in the app drawer.
- Phone is rooted with Clockworkmod recovery.
- Download Fre3vo and place in RootFiles folder created in earlier step.
- Open command prompt as described in earlier step.
- Type following ADB commands - pressing the Enter key after each command:
- adb devices (If serial number appears, USB drivers are setup.
- adb push fre3vo /data/local/tmp
- adb shell chmod 777 /data/local/tmp/fre3vo
- adb shell /data/local/tmp/fre3vo -debug -start F0000000 -end FFFFFFFF
- Test for root by typing adb shell.
- If adb prompt changes to a #, type 'exit' and press Enter key, then type exit again until command prompt is displayed.
- Now, start the Revolutionary rooting process given above (starting with the step 'Open Revolutionary folder . . . ).
Build 2.11.605.9
Key Combinations:
Booting into Recovery Mode:
Volume Down + Power
If you decide you would rather have an expert root your phone or you want to install a custom ROM like CyanogenMod, feel free to click on the 'Schedule' button below to schedule a remote session with ROMWarez.com.